field_job_employment_type

field_job_occupational_field_parents_all

job_organization_name

city

state

<h3>Job Description</h3>
Job DescriptionSalary: 
Founded in 2002, MAS Building and Bridge is a New-England based General Contractor that specializes in Heavy-Civil Construction, including bridge, rail, marine, and utility projects.
Our goal is to provide interns with a well-rounded experience, assisting our Field Engineers with daily tasks to support our field operations. Our belief is that learning is best achieved at the jobsite, so the internship program is primarily focused on field-related tasks.
 
We are looking for motivated, detail-oriented Civil Engineering and Construction Management students interested in learning more about heavy civil construction.Some of the daily tasks for an intern/co-op include:
<ul>
<li> Assistance with Layout and Operation Planning </li>
<li> Material Procurement andSubmissions</li>
<li> Quality Control Planning and Inspections </li>
<li> Quantity Tracking and Takeoffs</li>
<li> Coordination with Site Personnel and Subcontractors</li>
</ul>
A typical workday is from 7:00 am to 4:00 pm, Monday through Friday (40 hours per week excluding lunch). 
A drivers license and access to a car is necessary as MASs office and projects are typically not accessible to public transportation.
MASs main office is located in Norfolk, MA less than 3 miles from Gillette Stadium.
 
Women, Veterans, and minorities are encouraged to apply.
 
Visit our careers page to view other opportunities:
<a href="https://www.masbuildingandbridge.com/open-positions" target="_blank">https://www.masbuildingandbridge.com/open-positions</a>
 
MAS Building &amp; Bridge, Inc. provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability or genetics. In addition to federal law requirements, MAS Building &amp; Bridge, Inc. complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.

Field Engineer Intern/Co-op - For Summer 2026

<h3>Job Description</h3>
Job DescriptionSr RF Engineer
Northampton, MA Schedule: 9/80 M-F
$140,000 to $170,000+Full benefits package+ Bonus + Paid Relocation 
Are you an experienced RF Engineer looking for an opportunity to design and develop cutting-edge electrical/electronic solutions from concept to completion? We are seeking a Sr RF Engineer to join our team in Northampton, Massachusetts. In this role, you will play a crucial part in managing project initiatives, influencing processes, and making significant improvements to our products and systems.
As a RF Engineer, your responsibilities will include:
<ul>
<li>Design &amp; Development: Lead the design and development of electrical/electronic concepts, transforming them into finished, working designs based on specifications, customer requirements, and multidisciplinary inputs.</li>
<li>System Integration: Lead and support the assembly and integration of products/systems containing microwave components or subsystems, leveraging your extensive troubleshooting expertise.</li>
<li>RF System Synthesis: Synthesize and define RF System designs for complex electro-optical solutions.</li>
<li>Coordination: Coordinate system-level requirements internally and with subcontractors and suppliers.</li>
<li>Microwave Component Design: Design and develop microwave components, circuits, and subsystems for multidisciplinary product applications.</li>
<li>Test &amp; Analysis: Develop test procedures, specify test equipment (including Vector Network Analyzers, Noise Figure Analyzers, and Spectrum Analyzers), and provide technical assistance during testing of prototype and production hardware.</li>
<li>Continuous Improvement: Identify and execute continuous improvement plans for the Electrical Engineering team.</li>
<li>Project Management: Develop estimates for project completion (engineering hours and schedule duration) and manage projects/processes with general supervision, communicating regularly with other engineering disciplines.</li>
<li>Design Review &amp; Mentorship: Coordinate and lead design reviews, present complex internal and external design reviews, and provide technical supervision and mentorship to junior engineers.</li>
<li>Production Support: Support the production floor for system integration and test.</li>
<li>Documentation: Develop production documentation and manage it through the configuration management process (official release, redlines, Configuration Control Board meetings, etc.).</li>
<li>Design Analysis: Perform design analysis and establish circuit-level tests to validate designs, including thermal effects and tolerance contributions.</li>
</ul>
Requirements
Required Qualifications:
<ul>
<li>US Citizenship: Ability to obtain a DOD Secret Security Clearance, which requires U.S. Citizenship.</li>
<li>Education &amp; Experience:</li>
<ul>
<li>Bachelor's degree in Electrical Engineering and a minimum of 4 years of relevant experience; OR</li>
<li>Graduate Degree and a minimum of 2 years of related experience; OR</li>
<li>In lieu of a degree, a minimum of 8 years of prior related experience.</li>
</ul>
<li>RF Design Experience: 2+ years of experience designing and developing microwave components, circuits, and subsystems for multidisciplinary product applications.</li>
<li>Software Proficiency: Familiarity with MS Office products.</li>
</ul>
Preferred Additional Skills:
<ul>
<li>Mixed signal Circuit Card Assembly (CCA) design and development experience, preferably with Mentor Graphics tools.</li>
</ul>

Senior RF Engineer

<h3>Job Description</h3>
Job Description
About the job
Location: On-site — Cambridge, MA (Eastern Time / UTC -4) Start date: ASAP Languages: English (required)
We are hiring at Pragmatike to expand our team and drive the growth of our internal projects.
Our focus is on developing cutting-edge solutions in Cloud Computing, Blockchain, and Artificial Intelligence, while fostering a culture of collaboration and innovation. Joining us means being part of a passionate team where your ideas and skills directly contribute to shaping tomorrow's technologies.
If you're passionate about applied AI and enjoy solving real problems in a fast-paced environment, we’d love to meet you.
Responsabilities:
<ul>
<li>
Design, implement, and fine-tune machine learning models for production-grade use cases.
</li>
<li>
Curate and manage datasets used in training, validation, and evaluation.
</li>
<li>
Work closely with engineers to integrate ML models into larger systems and monitor their performance in production.
</li>
<li>
Ensure that AI solutions are efficient, maintainable, and aligned with business objectives.
</li>
<li>
Maintain thorough documentation for reproducibility and team collaboration.
</li>
</ul>
Required qualifications:
<ul>
<li>
Solid hands-on experience with AI/ML systems from development to deployment.
</li>
<li>
Proficient in Python; familiarity with TypeScript or Go for integration tasks is a plus.
</li>
<li>
Strong command of tools and frameworks such as PyTorch, Transformers, Llama-factory, VLLM, Megatron-LM, and CUDA.
</li>
<li>
Comfortable working with cloud environments (AWS, GCP, or Azure) and containerized deployments (Docker, Kubernetes).
</li>
<li>
Strong communication and team collaboration skills. 
</li>
</ul>
Preferred qualifications:
<ul>
<li>
Experience deploying models at scale in production environments.
</li>
<li>
Familiarity with CI/CD and DevOps workflows for ML applications.
</li>
<li>
Previous experience in high-paced, innovation-driven environments (e.g., startups).
</li>
<li>
Background in systems-level optimization for machine learning workloads.
</li>
</ul>
Why join us?
<ul>
<li>
Work on impactful AI systems with real-world applications.
</li>
<li>
Join a focused, collaborative engineering team based in Boston/Cambridge.
</li>
<li>
Be part of a company where your ideas and code go into production—not just into slide decks.
</li>
<li>
Competitive salary, equity options, and strong benefits.
</li>
<li>
Continuous learning environment with room to grow technically and professionally.
</li>
</ul>

AI/ML Engineer

<h3>Job Description</h3>
Job DescriptionJOB DESCRIPTION: A. Purpose and Scope The Field Technician (FT) is responsible for making sure all equipment in the field is installed and maintained correctly at each customer’s site; also, responsible for good customer service relations including but not limited to consistent and clear communication with the client, proper follow-up, and providing solutions to ensure customer satisfaction. B. Responsibilities The Field Technician installs devices and products, calibrates and maintains installed equipment, develops test procedures and fixturing as required. He/She is responsible for maintaining field records and performing installation/operational/ and performance qualifications. The Field Technician is also responsible for complying with quality systems procedures as required. It is the Technician’s responsibility for making sure the proper information is put in the company database, such as ACT. After receiving the proper training, the Field Technician will go on call and answer Emergency Service Situations. C. Organization Relationships The Field Technician reports to the National Service Director and/or Lead Field Tech Manager. JOB REQUIREMENTS: A. Education and Training The Field Technician should have a two-year technical degree, or equivalent experience as determined by the Field Service Manager. B. Technical Requirements The Field Technician is required to complete supervised in-house training, as well as, read and understand any pertinent training or department procedural manuals to become proficient on all systems maintained by Safepoint Scientific. C. Experience Prior experience is preferred but not required. D. Travel The Field Technician will be required to travel full-time to any location inside and outside the US and be able to work flexible hours. Responsible management of travel expenses is required. Travel expenses will be covered by SafePoint Scientific but a driver’s license and reliable car is needed. &nbsp;

Field Technician

<h3>Job Description</h3>
Job DescriptionJoin our Team of Employee Owners!Why work for a company when you can own it?
 
FRMA/Siewert Equipment, a Division of Cummins-Wagner, is seeking a Field Service Technician at our Oxford, MA location. Cummins-Wagner Company, Inc. is a 100% Employee-Owned company and leader in the distribution of industrial and mechanical equipment.
 
Job Title: Field Service Technician (E-ONE) 
Department: FRMA Service
Location: Oxford, Massachusetts
Reports To: Service Supervisor 
 
 
Job Overview:
 
The Field Service &amp; Repair Technician (E-ONE) performs hands-on technical services primarily for Environment ONE (E-ONE) grinder pumps and pump stations. This position requires a motivated professional with a high degree of technical aptitude to provide both in-shop and field service to support Residential and Municipal customers throughout New England. Essential characteristics include good communication skills, customer service skills, teamwork, attention to detail, ability to work independently, flexibility to support after-hours services, and some travel.
 
 
Our most successful Field Service Technicians:
<ul>
<li>Possess superior communication, analytical, and organizational skills</li>
<li>Exhibit goal-oriented behaviors and time management principles</li>
<li>Exude a customer-focused attitude </li>
<li>Apply extensive attention to detail to all tasks</li>
<li>Toggle between projects and responsibilities with ease</li>
<li>Possess basic experience with computers and wireless communication devices preferred.</li>
<li>Must be able to lift 50 lbs. unassisted and 100 lbs. assisted.</li>
<li>Ability to read and interpret diagrams and schematics</li>
<li>Ability to operate test/measuring equipment</li>
<li>Possess experience working with residential or municipal customer</li>
<li>Possess a High school diploma / GED equivalent</li>
<li>Must be able to pass background and reference checks, as well as a drug test</li>
<li>Must maintain an active driver’s license with a clean driving record</li>
</ul>
 
Scope of Responsibility
<ul>
<li>Maintenance &amp; repair services for E-ONE grinder pumps and pump stations</li>
<li>New equipment start-up commissioning and training</li>
<li>Prepare proper documentation for assigned work</li>
<li>Provide and maintain common tools for assigned work</li>
<li>Develop knowledge and expertise with all aspects of E-ONE pumps and pump stations</li>
<li>Build and maintain positive relationships with customers, coworkers, and suppliers</li>
<li>Maintain an organized, clean &amp; resourceful work environment to include the shop, individual work areas, and service vehicle</li>
<li>Understand and adhere to all safety-related policies, rules, and guidelines</li>
<li>On-Call rotation for after-hours service required</li>
<li>Frequent day travel throughout New England with some overnight travel required</li>
<li>Perform all other duties as assigned</li>
</ul>
 
Cummins-Wagner Competitive benefits package:
<ul>
<li>Employee Stock Ownership Program</li>
<li>Bonus Program</li>
<li>Tuition and Certification Fee Assistance</li>
<li>401k Match</li>
<li>Flexible Spending Account</li>
<li>Comprehensive Health Insurance</li>
<li>Life Insurance</li>
<li>Short &amp; Long-Term Disability Insurance</li>
</ul>
 
Our History: Founded in 1960 by "Charlie" Cummins and "Chub" Wagner, Cummins-Wagner began as a one-product, two-employee Company in a one-room office. Without a well-recognized brand product line, their commitment to customer service was the Company's impressive strength. This commitment to customer service allowed the Company to grow and attract significant product lines. Recognizing that ownership inspired the dedication that resulted in their customer-driven business's success, they established an ESOP* and sold the Company to their employees in 1985. Today, the Company's strength comes from the product lines we represent and from the total dedication of over 250 Employee Owners to the principle of customer satisfaction. We appreciate the value of our impressive team and look forward to welcoming you! *As an "ESOP" company with 100% of the common stock universally and exclusively owned by the Employee Stock Ownership Trust (ESOT), employees are motivated to work for the long-term success of the Company to a degree unmatched by those of our competitors. ESOP companies generally outperform non-ESOP companies. For more information on ESOPs, visit <a href="http://www.esopassociation.org" target="_blank">www.esopassociation.org</a>. Cummins-Wagner Co. Inc. is an Equal Opportunity Employer and does not discriminate based on race, sex, age, handicap, religion, national origin, or any other basis prohibited by applicable law.Cummins-Wagner Co. Inc. is a 100% Employee-Owned Company.

Field Service Technician (E-ONE)

<h3>Job Description</h3>
Job DescriptionDescriptionCreativity. Innovation. A desire to effect positive change. That’s what it takes to work at Fuss &amp; O’Neill – because that’s what we do for the communities in which we work: we create, innovate, and design long-lasting improvements that improve quality of life. Quality of life is also important on the job, so we’ve prioritized work-life balance by offering flexible/remote work opportunities, part-time benefits, and generous PTO. We believe that each day is an opportunity to support one another, to support our clients, and to support our communities. If you feel the same, then you’ve found your future. &nbsp;The Transportation group is seeking an engineering intern to support a variety of projects, with a focus on highway, roadway, and traffic engineering design. Our internship program is a 12-week paid summer program.&nbsp; We offer in depth work experience on real client projects in a supportive and collaborative environment.&nbsp; The position is full-time Monday through Friday and may sit out of Boston, MA or Quincy, MA.&nbsp; Key Responsibilities
<ul>
<li>Assist with roadway and traffic engineering design, including signals, signs, and pavement markings</li>
<li>Support traffic studies, data collection, and analysis of traffic flow and patterns</li>
<li>Contribute to transportation planning and traffic impact studies, including permit applications</li>
<li>Conduct field visits, surveys, and construction support activities</li>
<li>Prepare technical reports and utilize design software such as AutoCAD, Civil 3D, and Synchro</li>
</ul>
 Skills, Knowledge and Expertise
<ul>
<li>Pursuing a degree in civil engineering and/or transportation engineering</li>
<li>3.0 GPA or higher</li>
<li>Knowledge of AutoCAD, Civil 3D and/or similiar programs is a plus</li>
<li>Proficiency with MS Office programs</li>
<li>Ability to lift up to 30 lbs. of equipment</li>
</ul>
 Why You’ll Love Working with Us
<ul>
<li>Schedule Flexibility: Customize your work schedule to fit your life.</li>
<li>&nbsp;Health &amp; Wellness: Comprehensive health benefits to keep you and your family healthy.</li>
<li>&nbsp;Continuous Learning: Access to online courses, conferences, and learning materials to fuel your professional growth.</li>
<li>&nbsp;Paid Time Off: Take the time you need to recharge with our generous paid time off policy.</li>
<li>&nbsp;Career Advancement: Clear paths for promotions and the opportunity to take on new challenges.</li>
<li>&nbsp;Fun Team Culture: Regular team-building activities, happy hours, and company outings.</li>
</ul>
 Visa sponsorship is NOT available for this position All offers are contingent upon a successful criminal background check. Fuss &amp; O'Neill, Inc. is proud to be an Affirmative Action/Equal Opportunity Employer. Fuss &amp; O’Neill participates in the Federal e-Verify program. #LI-AS1 #DNP

1,133 Engineering Jobs